Licensed & Insured, in Albuquerque and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Albuquerque
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (505) 420-5488 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Albuquerque and surrounding areas · On-site visits included · Free estimate within 24h
Albuquerque Metal Roofing is a team of local certified professionals based in Albuquerque. We respond quickly in Albuquerque and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (505) 420-5488⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews
“Had these guys put a metal roof on our hangar out by the airpark and they knocked it out in three days. The crew of four was on time every morning and swept the whole slab clean before they left. Way sturdier than the old panels that were flapping in the wind.”
Commercial Metal Roofing
“We wanted to cover the old patio entry roof without tearing everything off, and the retrofit over the existing shingles worked out great. They matched the flashing around the adobe walls really carefully so nothing looks patched together. Took about a week and a half from start to finish.”
Metal Roof Over Shingles (Retrofit)
“Our barn out in the rural part of the county had rusted-through panels and we needed it done before monsoon season. They installed new corrugated panels across the whole span and re-fastened everything with fresh screws. Honest pricing and they didn't try to upsell us on stuff we didn't need.”
Agricultural Metal Roofing
“I originally called about some yard drainage stuff but what I actually needed was gutters that could handle the runoff from our new metal roof, and they set me straight on that. They ran seamless gutters along the back of the house and tied them into the downspouts properly. Small gripe is they had to reschedule once, but the work itself is solid.”
Gutters for Metal Roofs
“A section of our corrugated roof was leaking right over the kitchen and I was dreading a huge bill. They found the problem was a handful of backed-out screws and worn washers, replaced them and sealed it up in one afternoon. No leak since, even after that big storm last month.”
Metal Roof Repair
“We went with standing seam for our southwest-style home and it looks incredible against the stucco. The crew of five finished the whole roof in under a week and the cleanup was honestly better than before they started. Neighbors have already asked me who did it.”
Standing Seam Metal Roofing
“Full tear-off and replacement on our house, and they walked me through every step including the flashing around the chimney. It rained the day after they finished and not a single drip. Really relieved we went with a company that actually knows metal.”
Metal Roof Replacement
“Called them out for an inspection before we listed the house and they gave me a thorough report with photos of every seam and fastener. They did flag a few screws that needed re-fastening near the basketball hoop side of the roof, which they handled on the spot. Fair price and no pressure to buy anything extra.”
Metal Roof InspectionReal photos of our work in Albuquerque · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel installation | Starting at $8/sq ft | Includes panels, high-temp underlayment, and fasteners; roof pitch and access move the price. |
| Standing seam installation | Starting at $12/sq ft | Concealed clips and formed panels; roof complexity and panel width drive the final rate. |
| Stone-coated steel or metal shingle installation | Starting at $11/sq ft | Includes profile-matched panels and trim; steep pitches and multiple valleys add labor. |
| Tear-off and deck repair | On estimate | Old shingle layers, rotten sheathing, and ventilation upgrades need an on-site look first. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam metal roof installation | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and standard flashing; price rises with pitch, tear-off, and panel gauge. |
| Standing seam over existing shingles (retrofit) | Starting at $11/sq ft | Includes sub-framing and panels over one shingle layer where code allows; adds cost for deck repairs and complex flashing. |
| Copper or specialty standing seam | On estimate | Copper and zinc pricing depends on market metal cost, panel size, and patina finish; on-site look required before quoting. |
| Complex or large-scale roof | On estimate | Cut-up rooflines, parapets, canales, and multiple penetrations need an on-site measure before we can give a firm number. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic metal roof replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment and new metal panels; price rises with pitch and access difficulty. |
| Standing seam replacement | Starting at $14/sq ft | Concealed-fastener system with new flashing and trim; cost moves with roof complexity and panel color choice. |
| Stone-coated steel replacement | Starting at $12/sq ft | Spanish tile or shake profile over new underlayment; HOA design requirements can raise the material cost. |
| Complex or large-scale job | On estimate | Multi-level roofs, heavy deck repair, historic district detailing and rural access all need an on-site look first. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic exposed-fastener retrofit | Starting at $7/sq ft | Includes underlayment, R-panel, and standard flashing over sound existing shingles. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed-fastener panels, subframe where needed, and premium trim details. |
| Stone-coated steel or metal shingle retrofit | Starting at $10/sq ft | Tile or shake profile panels, HOA-friendly colors, and matching trim. |
| Deck repair or partial tear-off | On estimate | Priced after we probe the deck, since soft sheathing and rot change the scope. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard repair call | From $450 | Includes diagnosis and a small repair such as resealing penetrations or replacing a few screws. |
| Panel replacement | From $650 | Covers replacing damaged panels; matching profile and finish is the main cost factor. |
| Flashing and penetration repair | From $550 | Rebuilding failed flashing at chimneys, skylights, and walls; access and height move the price. |
| Storm and wind damage repair | On estimate | Scope depends on how many panels, ridge caps, and trim pieces were affected. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Diagnostic and minor leak repair | Starting at $450 | Includes leak tracing, inspection and a small repair such as replacing screws, washers or a short flashing joint. |
| Flashing or penetration repair | Starting at $650 | Covers rebuilding a pipe boot, skylight curb or chimney flashing, with price driven by access and height. |
| Seam or panel section repair | Starting at $850 | For standing seam separation or damaged panel sections, priced by panel type and the length of the repair. |
| Storm damage leak repair | On estimate | Hail or wind damage needs an on-site look to scope panel replacement and document the damage for insurance. |
| Emergency tarping | Starting at $350 | Temporary tarp and stabilization after a monsoon storm, credited toward the permanent repair if booked together. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (up to 25 fasteners) | Starting at $750 | Includes roof walk, failed screw removal, new oversized screws and UV-rated washers on a single-story roof with standard access. |
| Partial roof re-fastening (26 to 75 fasteners) | Starting at $1,150 | Covers one roof slope or section, with hole inspection and washer replacement; steeper pitch or second story raises the price. |
| Full-roof re-fastening sweep | Starting at $1,850 | Every fastener and washer on the roof replaced in one pass; price scales with roof square footage and panel count. |
| Re-fastening with panel or flashing repair | On estimate | Needs an on-site look because damaged panels, ridge caps, or flashing must be assessed before a number is given. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (carport, shed, portal) | Starting at $5.50/sq ft | Includes standard 26 or 29 gauge panels, fasteners, closures, and basic flashing on an accessible roof. |
| Ribbed R-panel roof (barn, workshop) | Starting at $6.25/sq ft | Includes heavier-gauge ribbed panels, wind-rated screw pattern, ridge and eave closures, and standard flashing. |
| Insulated panel system | Starting at $9.00/sq ft | Includes factory-bonded foam-core panels, trim, and fasteners for conditioned workshops and heat-sensitive spaces. |
| Tear-off and disposal of old roofing | From $1.50/sq ft | Adds labor and dump fees when an existing roof must come off before new panels go on. |
| Complex or large-scale job | On estimate | Steep access, skylights, multiple penetrations, or large spans need an on-site look before we quote. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, simple gable | Starting at $9/sq ft | Includes tear-off, underlayment and standard flashing on a straightforward gable roof. |
| Metal shingle roof, complex roof | Starting at $12/sq ft | Multiple valleys, dormers and penetrations add labor and custom flashing work. |
| Metal shingle roof over existing shingles | On estimate | Retrofit eligibility depends on existing layers and deck condition, so on-site review is required. |
| Deck repair or sheathing replacement | Priced per sheet | Soft or rotted sheathing found during tear-off is replaced at a per-sheet rate. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard pitch | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, panels, and standard flashing on an accessible roof. |
| Stone-coated steel, steep or cut-up roof | Starting at $12/sq ft | Higher labor for steep pitches, multiple valleys, dormers, and complex flashing details. |
| Retrofit over existing shingles | Starting at $8/sq ft | Installed over a sound single layer where code allows, with new underlayment and flashing. |
| Complex or large-scale job | On estimate | Historic district, HOA design review, or structural prep needs an on-site look before pricing. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent work (bay windows, portal caps, flashings) | Starting at $20/sq ft | Includes shop fabrication and concealed fastening; complexity of curves and access moves the rate. |
| Zinc or aluminum standing seam accents | Starting at $18/sq ft | Includes formed panels and cleats; roof pitch and number of penetrations affect the final figure. |
| Full copper architectural roof | On estimate | Needs an on-site look at deck condition, seam layout, and total square before a firm number. |
| Custom fabrication (curved portals, dormers, canale liners) | On estimate | Priced per piece after field measurement, since non-standard geometry cannot be quoted from a photo. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic reflective coating | From $2.50/sq ft | Includes wash, prep, rust spot treatment, and one reflective coating system on a simple roof. |
| Rust treatment and full system | From $3.75/sq ft | Adds rust converter, primer on bare metal, and fastener re-seal for exposed-fastener panels. |
| Stone-coated steel restoration | From $4.50/sq ft | Granule-compatible coating and hail bruise repair on Spanish tile profile panels. |
| Commercial and agricultural roofs | On estimate | Large square footage, low slope, and access logistics need an on-site look before pricing. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration flashing repair | Starting at $600 | Covers one pipe boot or small counterflashing repair on an accessible roof, including removal and resealing. |
| Chimney flashing rebuild | Starting at $950 | Custom bent counterflashing and new laps around the chimney, priced by height and roof pitch. |
| Skylight curb re-flash | Starting at $1,100 | Removes old curb flashing, repairs the frame and re-flashes the opening on most roof types. |
| Valley or parapet metal work | On estimate | Flat and low-slope roofs need an on-site look before we quote laps, length and access. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Entry and walkway guard run | Starting at $1,200 | Short guard run over one door or walkway, including layout and sealed installation. |
| Full eave guard layout | Starting at $2,400 | Guards along the full eave line, priced by linear feet and panel seam type. |
| Snow rail or fence system | On estimate | Continuous rail systems need an on-site look at pitch, panel length, and snow load. |
| Guard plus fastener and sealant check | Starting at $1,600 | Guard installation combined with a fastener torque and sealant inspection on the same visit. |
| Travel | Included | in Albuquerque and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Roof walk, photo documentation and written repair versus replacement assessment included at no charge. |
| Minor repair (panel, flashing, sealant) | Starting at $350 | Covers small panel swaps, flashing repair and sealant renewal; access and roof pitch move the price. |
| Wind damage re-fastening and re-clamping | Starting at $600 | Includes screw and clip replacement plus panel re-seating; number of affected panels drives cost. |
| Hail or storm panel replacement (multiple panels) | On estimate | Needs on-site look to match panel profile, color and clip system before quoting. |
| Travel | Included | In Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full on-roof fastener, seam, flashing, and coating check with photos and written report. |
| Post-storm insurance inspection | Starting at $250 | Hail and wind damage documentation formatted for your adjuster, includes photos and measurements. |
| Pre-purchase inspection | Starting at $300 | Condition report with remaining service life and repair estimate for buyer negotiation. |
| Commercial or large outbuilding | On estimate | Scope and roof size require an on-site look before we quote the inspection. |
| Travel | Included | in Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, single-story run | Starting at $9/linear ft | Includes on-site fabrication, hangers matched to the panel profile, and standard downspouts on an accessible eave. |
| Standing seam with clamp-on hidden hangers | Starting at $13/linear ft | Non-penetrating brackets that protect the panel warranty, priced higher because hanger placement and seam alignment take extra time. |
| Over-sized downspouts and debris screens | Starting at $22/linear ft | Larger outlets and screened tops sized for monsoon volume and cottonwood fluff, with clean-out access on long runs. |
| Two-story or difficult-access eave | On estimate | Ladder and lift time, roofline complexity, and parapet detailing need an on-site look before we quote a number. |
| Travel | Included | in Albuquerque and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (505) 420-5488, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn, shed or workshop re-roof | Free estimate | On-site measurement, panel and fastener recommendation, written scope before any material is ordered. |
| Exposed-fastener panel installation | Starting at $4.50 per sq ft | R-panel or corrugated over purlins, includes fasteners and basic trim, price moves with gauge and access. |
| Standing seam commercial roof | Starting at $9.00 per sq ft | Concealed-fastener panels, trim and flashing, cost rises with roof complexity and insulation. |
| Screw replacement and re-fastening | Starting at $1.75 per sq ft | Washer and fastener renewal on sound panels, priced by roof area and how many screws are failing. |
| Large or complex commercial building | On estimate | Multi-level roofs, heavy penetrations and structural work need an on-site look before pricing. |
| Estimate and travel | Free, included | In Albuquerque and surrounding areas, no mileage fee, response within 24 hours at (505) 420-5488. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Albuquerque need a crew that understands this high-desert plateau, not a coastal or Midwest playbook. Albuquerque Metal Roofing is a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal systems on homes and outbuildings across Albuquerque, Rio Rancho, Bernalillo, Corrales, and Los Lunas. We work on steep mountain pitches in the East Mountains, roofs shaded by mature cottonwood and Siberian elm, and low-slope parapet roofs in the North Valley and Barelas.
We also know the large stock of 15 to 30 year old exposed-fastener roofs on carports, workshops, and barns around Corrales, Los Ranchos, and Placitas, where UV and freeze-thaw have dried out sealing washers and backed screws out. If you want straight guidance on whether to repair, coat, recover, or replace, start with a free estimate and we will tell you plainly which option fits your roof and your budget.
Most metal roof leaks in Albuquerque trace back to a short list of failures, and each has a clear cause. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as the EPDM sealing washers dry, shrink, and crack under intense high-altitude UV. Once the washer loses its seal, water works past the screw head. Thermal movement from wide daily temperature swings causes seams to separate and ridge caps to loosen. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at the most common penetration points. Spring wind storms with strong gusts lift panel edges, and fallen limbs from cottonwoods and elms puncture panels or dent ribs.
Ignoring these failures gets expensive fast. Water tracks along purlins and decking far from the entry point, so a stain on the ceiling may be many feet from the actual gap. Rotted sheathing and saturated insulation follow, and what started as a small repair becomes a deck replacement. Call (505) 420-5488 when you see a ceiling stain, a lifted panel, or a loose screw line, and we will find the source rather than guessing at the stain.
The honest call between repair and replacement depends on the system, the deck, and how widespread the failure is. A full screw replacement and re-fastening with new sealing washers often restores a watertight roof for a fraction of replacement cost, and targeted metal roof leak repair handles isolated flashing and seam issues. When panels are perforated, seams are failing across the whole field, or the deck is soft, we will say so and quote replacement instead of selling repeat repairs.
We install the full range of metal systems and match the system to the home rather than the other way around. Standing Seam Metal Roofing uses concealed clips and hidden fasteners, with Kynar 500 / PVDF finishes in charcoal, bronze, and light reflective colors that suit adobe, stucco, and brick. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, workshops, and carports. Metal Shingle Roofing and Stone-Coated Steel Roofing in a Spanish tile profile fit historic districts and HOA design reviews, and Copper & Specialty Metal Roofing handles accents over portals and bay windows.
The honest comparison: standing seam costs more and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound and local code allows the existing layers, and a full tear-off is the right call when the deck is not. We will tell you which one your roof actually needs.
Metal roof projects are typically quoted per square foot for installation and replacement, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Expect typical ranges rather than a single number, because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
See our pricing page for how we build an estimate, then request a free estimate or free roof inspection so we can look at your actual roof instead of quoting from a photo. We will show you where the money goes and where the cheaper option is the right one.
After a hail or wind event, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we find and let the carrier decide.
On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and fees and inspection requirements differ by jurisdiction. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Albuquerque building or planning department before starting your project. For documentation or a scope review, contact us.
Ready to get started? Albuquerque Metal Roofing serves in Albuquerque and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Albuquerque · Response within 24h · No commitment · ☎ (505) 420-5488
Your Free Quote Request