Serving the Albuquerque area  ·  (505) 420-5488  ·  Open Mon-Sun 7am-7pm
📞 (505) 420-5488 Free Quote

Metal Roofing in Cedar Crest, NM (87008) · Local Professionals

Albuquerque Metal Roofing · Fast response in Cedar Crest and the Albuquerque area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (505) 420-5488
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Cedar Crest sits at 7,000 feet in the Sandia Mountains, where steep pitched roofs shed real snow and pine needles pile up in valleys and behind chimneys. Homes here are a mix of mountain cabins, 1970s and 1980s A-frames, and newer custom builds on wooded lots along Highway 14 and Turquoise Trail. If your roof is showing age, ice dams, or wind-lifted panels, we can help.

Homeowners in Cedar Crest (87008) call Albuquerque Metal Roofing because we understand mountain weather. From the steep drives off Frost Road to the pine-shaded lots near Sandia Crest Road, we install standing seam and snow guards built for freeze-thaw cycles, heavy snow loads, and spring gusts that peel back cheap fasteners.

Metal Roofing in Cedar Crest (87008)

Cedar Crest properties are not Albuquerque flat-roof lots. Most homes here sit on sloped, wooded terrain with tall pines, narrow driveways, and steep roof pitches that demand fall protection and careful staging. Snow and ice linger longer at this elevation, so ice damming at eaves and valleys is common. Pine needles and oak leaves trap moisture against panels and clog gutters, which leads to fastener corrosion and seam separation. We regularly install snow guards and ice protection on standing seam roofs, and we know how to flash around the chimneys and skylights that mountain homes tend to have. Access can be tight, and we plan material delivery and staging to avoid tearing up your driveway or landscape.

Our team has worked roofs across the East Mountains and the Albuquerque metro, from Cedar Crest to Placitas and Tijeras. We know the difference between a cabin roof that needs a full retrofit and a newer build that just needs screw replacement and re-fastening after a wind storm.

Our services in Cedar Crest

How a Job Works in Cedar Crest

Step 1: Call us at (505) 420-5488 or request a free estimate online. We schedule an on-site assessment at your Cedar Crest property, inspect the roof, attic, flashing, and fasteners, and talk through options. You get a written scope and price before any work starts.

Step 2: Once you approve, we pull the required roofing permit with the local jurisdiction and schedule the work. On mountain lots we plan for steep grades, tight turnarounds, and material staging that keeps your driveway clear. If your home is in an HOA or a design-review area, we help coordinate panel profile and color approval. Crews are fully insured and follow fall-protection and snow-load best practices.

Step 3: We clean up daily and do a final walkthrough with you. Magnets sweep the yard for screws and metal shavings, gutters are cleared, and we make sure you know how to maintain snow guards and check fasteners before winter. We leave your property clean and your roof watertight.

Pricing in Cedar Crest depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and metal over shingles from $7. Repairs start at $450, screw replacement and re-fastening at $750, and snow guards and ice protection from $1,200. Steep mountain roofs, tight driveways, and multiple layers of old roofing can add cost, and emergency storm or leak repairs are priced for urgency. We give free estimates and written quotes so you know the number before we start. Call (505) 420-5488 to schedule yours.

Do metal roofs hold up to the snow and ice in Cedar Crest better than asphalt shingles?
Yes. Standing seam metal sheds snow more readily than shingles, especially on the steep pitches common in Cedar Crest. With snow guards properly placed, you control where snow drops instead of having it slide off all at once. Metal also resists freeze-thaw damage better because it does not absorb water like asphalt does.
How fast can you respond to storm damage or an active leak in Cedar Crest?
We prioritize active leaks and storm damage. Call (505) 420-5488 and we will schedule an inspection as quickly as possible. For temporary protection we can tarp or seal the area, then return with a permanent repair plan. Response times depend on weather and access, but we keep you informed.
What does a typical metal roof replacement cost in Cedar Crest?
Most Cedar Crest replacements fall between $9 and $14 per square foot installed, depending on panel type, roof pitch, and whether we remove old shingles. Standing seam runs higher than corrugated or R-panel. Snow guards, skylight flashing, and chimney work add to the total. We provide a free written estimate.
Do I need a permit for a metal roof in Cedar Crest?
Roofing permits are commonly required for replacement or re-roof, and requirements vary by jurisdiction. We verify with the local building department before starting and include permit coordination in our scope. Historic or HOA design review may also apply, and we help with that paperwork.
My neighbor's trees hang over my roof. What can I do about pine needles and debris?
You have the right to trim branches that cross your property line in most cases, but check local rules and talk with your neighbor first. For roof protection, we recommend regular gutter cleaning and a maintenance plan. We can also inspect valleys and behind chimneys where debris collects and causes rust or ice dams.
Are you fully insured for work on my Cedar Crest property?
Yes. Albuquerque Metal Roofing carries general liability insurance and workers' compensation coverage. We can provide proof of insurance before work begins so you are protected if anything goes wrong on your property.
What maintenance should I do each fall before snow hits in Cedar Crest?
Clear pine needles and leaves from gutters, valleys, and behind chimneys. Check snow guards and fasteners for looseness, and look for lifted panels or sealant cracks. Schedule a professional inspection if you see rust, water stains, or ice dams from last winter. Fall is the best time to catch small issues before freeze-thaw season.

Nearby service areas

📍 Albuquerque 87102📍 Rio Rancho 87144📍 Bernalillo 87004📍 Corrales 87048
Why choose us?

Trusted professionals in Albuquerque

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Albuquerque

All your work handled by qualified professionals in Albuquerque

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Albuquerque

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Mike J.
⭐⭐⭐⭐⭐
MJ
Mike J.
Albuquerque

“Had these guys put a metal roof on our hangar out by the airpark and they knocked it out in three days. The crew of four was on time every morning and swept the whole slab clean before they left. Way sturdier than the old panels that were flapping in the wind.”

Commercial Metal Roofing
Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Corrales

“We wanted to cover the old patio entry roof without tearing everything off, and the retrofit over the existing shingles worked out great. They matched the flashing around the adobe walls really carefully so nothing looks patched together. Took about a week and a half from start to finish.”

Metal Roof Over Shingles (Retrofit)
Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Edgewood

“Our barn out in the rural part of the county had rusted-through panels and we needed it done before monsoon season. They installed new corrugated panels across the whole span and re-fastened everything with fresh screws. Honest pricing and they didn't try to upsell us on stuff we didn't need.”

Agricultural Metal Roofing
Michelle B.
⭐⭐⭐⭐
MB
Michelle B.
Rio Rancho

“I originally called about some yard drainage stuff but what I actually needed was gutters that could handle the runoff from our new metal roof, and they set me straight on that. They ran seamless gutters along the back of the house and tied them into the downspouts properly. Small gripe is they had to reschedule once, but the work itself is solid.”

Gutters for Metal Roofs
James P.
⭐⭐⭐⭐⭐
JP
James P.
Los Lunas

“A section of our corrugated roof was leaking right over the kitchen and I was dreading a huge bill. They found the problem was a handful of backed-out screws and worn washers, replaced them and sealed it up in one afternoon. No leak since, even after that big storm last month.”

Metal Roof Repair
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Bernalillo

“We went with standing seam for our southwest-style home and it looks incredible against the stucco. The crew of five finished the whole roof in under a week and the cleanup was honestly better than before they started. Neighbors have already asked me who did it.”

Standing Seam Metal Roofing
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Tijeras

“Full tear-off and replacement on our house, and they walked me through every step including the flashing around the chimney. It rained the day after they finished and not a single drip. Really relieved we went with a company that actually knows metal.”

Metal Roof Replacement
Karen T.
⭐⭐⭐⭐
KT
Karen T.
Belen

“Called them out for an inspection before we listed the house and they gave me a thorough report with photos of every seam and fastener. They did flag a few screws that needed re-fastening near the basketball hoop side of the roof, which they handled on the spot. Fair price and no pressure to buy anything extra.”

Metal Roof Inspection
Free Quote

Get Your Free Quote

Metal Roofing in Albuquerque · Response within 24h · No commitment · ☎ (505) 420-5488

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Albuquerque ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm