Serving the Albuquerque area  ·  (505) 420-5488  ·  Open Mon-Sun 7am-7pm
📞 (505) 420-5488 Free Quote

Metal Roofing in Sandia Park, NM (87008) · Local Professionals

Albuquerque Metal Roofing · Fast response in Sandia Park and the Albuquerque area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Sandia Park sits at 7,000 feet on the east slope of the Sandia Mountains, where pine and piñon lots meet the Cibola National Forest and winter snow sticks around long after Albuquerque has melted off. The homes here are a mix of mountain cabins, newer custom builds, and ranch properties along NM-14 and the roads off Frost Road, many with steep pitches and tall pines that drop needles and limbs all year. If your roof is showing its age or you are tired of shoveling snow off asphalt shingles, we can help.

Homeowners in Sandia Park (87008) call Albuquerque Metal Roofing because we understand mountain roofs. We know that snow load, ice dams at the eaves, and pine needle buildup are part of life up here, and we install and repair metal roofs that handle it. Whether you are near Sandia Peak or off the Turquoise Trail, our team brings the right panels, fasteners, and snow guards for the East Mountains.

Metal Roofing in Sandia Park (87008)

Sandia Park lots are often sloped and wooded, with driveways that climb and trees that overhang the roof. That means access can be tight for trucks and materials, and we plan for that. The ground here is rocky and drains quickly, but snowmelt and monsoon rain can still pool at the foundation if gutters are not sized right. Pine needles are the biggest enemy of any roof in 87008: they trap moisture, clog valleys and gutters, and accelerate rust on exposed fasteners. Our team routinely clears needles, replaces failed screws, and installs snow guards and ice protection to prevent ice dams. We also know that UV at this elevation is brutal, so we use coatings and sealants that hold up to intense sun and freeze-thaw cycles.

We have worked on everything from small cabins off NM-14 to larger custom homes near Paa-Ko and Cedar Crest. Our crews are insured and familiar with the local building department and firewise recommendations for the East Mountains.

Our services in Sandia Park

How a Job Works in Sandia Park

Step 1: Call us at (505) 420-5488 or request a free estimate online. We schedule a visit to your Sandia Park property, inspect the roof and attic, check for leaks, and discuss your options. We will explain what we find and give you a written estimate before any work begins.

Step 2: Once you approve, we order materials and schedule the work. In Sandia Park, that often means coordinating delivery on narrow mountain roads and staging materials where they will not block your driveway. If your home is in an HOA or you need a permit from Bernalillo County, we help with the paperwork. We also take care to protect your landscaping and clear pine needles from the work area.

Step 3: When the job is done, we walk the roof with you, show you the completed work, and make sure you are satisfied. We magnet-sweep for nails and clean your gutters and yard. We leave your property clean and ready for the next snow.

Metal roofing in Sandia Park is priced by the square foot, and the final number depends on the size and pitch of your roof, access, the condition of the existing roof, and the material you choose. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. A metal roof over existing shingles (retrofit) starts at $7 per square foot. Repairs like leak fixes start at $450, and screw replacement and re-fastening starts at $750. Snow guards and ice protection start at $1,200. We provide free estimates and inspections, so you know exactly what your Sandia Park project will cost before we start. Call (505) 420-5488 to schedule.

My Sandia Park roof is covered in pine needles and I am worried about leaks. What should I do?
Pine needles are a real problem here. They hold moisture against the roof, clog valleys and gutters, and can work their way under panels. We recommend a professional inspection and cleaning, especially before winter. We can remove the needles, check fasteners and seals, and install gutter guards or snow guards as needed to keep debris from building up again.
A storm just knocked limbs onto my roof in Sandia Park. Can you help with emergency repairs?
Yes. We handle storm and wind damage repair in Sandia Park and the surrounding East Mountains. Call us at (505) 420-5488 and we will schedule a free inspection as soon as possible. We can tarp active leaks, remove damaged panels, and make permanent repairs. We also document damage for insurance claims if needed.
What does a metal roof cost for a typical Sandia Park home?
Most Sandia Park homes fall in the range of $8 to $12 per square foot for installation, depending on the material and roof complexity. Standing seam is at the higher end, while corrugated panels are more economical. Repairs start at $450. We give free on-site estimates so you get a precise number for your property.
Do I need a permit to replace my roof in Sandia Park?
Yes, Bernalillo County generally requires a permit for roof replacement and some repairs. The rules vary by jurisdiction, so we always confirm with the county building department before starting. We can handle the permit application for you and make sure the work meets local code.
My HOA has design rules for roofs. Can you help with approval?
We work with HOAs in Sandia Park regularly. We can provide material samples, color chips, and specifications for your HOA review. If there are property line setbacks or easements, we will respect them and coordinate with neighbors if access is needed. Just let us know your HOA requirements upfront.
Are you insured for work at my Sandia Park property?
Yes, we are fully insured with general liability and workers' compensation coverage. Our crews are trained and equipped to work safely on mountain roofs.
How often should I have my metal roof inspected in Sandia Park?
We recommend an annual inspection, ideally in late summer or early fall before snow season. Check for loose fasteners, sealant wear, and debris buildup. After heavy snow or wind, a quick check is wise. We offer free inspections and can set up a maintenance plan to keep your roof in good shape.
Why choose us?

Trusted professionals in Albuquerque

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Albuquerque

All your work handled by qualified professionals in Albuquerque

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Albuquerque

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Albuquerque · Response within 24h · No commitment · ☎ (505) 420-5488

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Albuquerque ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm