Serving the Albuquerque area  ·  (505) 420-5488  ·  Open Mon-Sun 7am-7pm
📞 (505) 420-5488 Free Quote

Metal Roofing in Tijeras, NM (87008) · Local Professionals

Albuquerque Metal Roofing · Fast response in Tijeras and the Albuquerque area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Tijeras is a canyon town where the East Mountains meet the Manzano foothills, and homes here sit on sloped, wooded lots that see colder nights and heavier snow than Albuquerque down in the valley. If your roof is showing its age, we install, repair, and replace metal roofing built for exactly this kind of terrain.

Homeowners in Tijeras (87008) call Albuquerque Metal Roofing because we understand freeze-thaw cycles, snow loads, and the wind that funnels through the canyon. We are based in Albuquerque and serve Tijeras and the surrounding East Mountains, and we are fully insured with general liability and workers' compensation coverage.

Metal Roofing in Tijeras (87008)

Tijeras sits at roughly 7,000 feet in the canyon along NM-337 and I-40, and the lots here are often steep, wooded, and accessed by gravel driveways that can be tricky for equipment. Homes range from older adobe and stucco places near the village core to newer mountain-style houses tucked into the piñon and juniper. The freeze-thaw cycle is the big issue: water gets behind loose fasteners or worn sealant, freezes overnight, and works the metal loose. Snow guards and ice protection are not optional up here, and we install them with the same care we give the roof itself. We also see wind-lifted panels after spring gusts and ice damming at the eaves on north-facing slopes. Our crews are trained on standing seam and exposed-fastener systems that handle the East Mountains climate, and we know how to work with the tight access and steep grades common in Tijeras.

We have been serving Tijeras and the greater Albuquerque area for years, and we treat every property like it is in our own backyard.

Our services in Tijeras

How a Job Works in Tijeras

Step 1: Call us at (505) 420-5488 or request a free estimate online. We will schedule an on-site assessment at your Tijeras property, inspect the roof and attic, check flashing and fasteners, and talk through options and pricing. We will also confirm permit requirements with the local building department, since rules vary by jurisdiction.

Step 2: Once you approve the scope, we order materials and schedule the work. In Tijeras, that often means planning around narrow canyon roads and limited staging space. We coordinate deliveries and equipment to minimize disruption, and if your property is in an HOA or historic district, we help with design review and color approval before we start.

Step 3: When the job is done, we walk the site with you, clean up every scrap and nail, and make sure you are satisfied. We do not leave until your property is clean and your questions are answered.

Pricing for metal roofing in Tijeras depends on the size and pitch of your roof, access, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and snow guards and ice protection at $1,200. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. We always provide a free estimate and a clear written scope before any work begins. Call (505) 420-5488 to schedule yours.

My Tijeras home is on a steep, wooded lot with a gravel driveway. Can you still install a metal roof?
Yes. We work on steep lots and gravel drives throughout Tijeras and the East Mountains regularly. We plan equipment and material staging carefully, and we can use specialized lifts or manual methods when access is tight. During the free estimate we will walk the property and explain exactly how we will handle access and protection for your landscaping.
A spring windstorm peeled back some panels on my roof near the canyon. How fast can you respond?
We prioritize storm and wind damage calls in Tijeras. Call (505) 420-5488 and we will schedule an inspection as soon as possible, often within a day or two depending on demand. We can secure the roof temporarily if needed and provide a written repair estimate. We also document damage for insurance claims if you need it.
What does a typical metal roof replacement cost for a 2,000 square foot home in Tijeras?
For a 2,000 square foot home, a basic metal roof replacement might start around $18,000, but the actual price depends on roof complexity, pitch, access, and whether you choose standing seam or a different profile. Snow guards and ice protection are often recommended in Tijeras and would add to that. We give you a detailed, itemized estimate for free so you know exactly what you are paying for.
Do I need a permit for a metal roof in Tijeras, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Tijeras, and requirements vary by jurisdiction. We confirm the rules with the local building department before starting and can handle the permit application for you. We will also let you know if your project is in a historic district or HOA that requires design review.
My neighbor's tree limbs hang over my roof. What are my options if I want to trim them?
Property line disputes and overhanging limbs are common in Tijeras. In New Mexico, you generally have the right to trim branches that cross onto your property, but you should not damage the tree or enter your neighbor's land without permission. We recommend talking with your neighbor first. If you are in an HOA, check the covenants for any specific rules. We can remove limbs that are on your roof during our work, but we are not arborists and will not trim beyond your property line.
Are you fully insured for work at my Tijeras property?
Yes, Albuquerque Metal Roofing is fully insured. We carry general liability insurance and workers' compensation coverage for all our crews.
What maintenance does a metal roof need in Tijeras to handle snow and freeze-thaw?
In Tijeras, we recommend an annual inspection, ideally in the fall before snow. Check that fasteners are tight and sealant is intact, clear debris from gutters and valleys, and make sure snow guards are secure. After heavy snow, use a roof rake to prevent ice dams at the eaves. We offer free estimates for inspections and can set up a maintenance plan to keep your roof in good shape year-round.
Why choose us?

Trusted professionals in Albuquerque

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Albuquerque

All your work handled by qualified professionals in Albuquerque

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Albuquerque

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Albuquerque · Response within 24h · No commitment · ☎ (505) 420-5488

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Albuquerque ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm