Serving the Albuquerque area  ·  (505) 420-5488  ·  Open Mon-Sun 7am-7pm
📞 (505) 420-5488 Free Quote

Metal Roofing in Edgewood, NM (87015) · Local Professionals

Albuquerque Metal Roofing · Fast response in Edgewood and the Albuquerque area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (505) 420-5488
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Edgewood isn't Albuquerque's suburbs. It's high desert ranch country at 6,700 feet, where lots run an acre or more, driveways are gravel, and the wind comes off the Manzano Mountains with nothing to stop it. Homes here range from 1970s and 80s ranches and double-wides on Route 66 frontage to newer stucco and pitched-roof builds off Sedillo Hill and Frost Road, plus workshops, barns, and horse setups that take a beating from hail and sun.

That's why Edgewood homeowners in 87015 call Albuquerque Metal Roofing. We know how fasteners back out on a west-facing R-panel shop after a few seasons of freeze-thaw, and how hail chews up exposed-fastener roofs on the east side of town.

Metal Roofing in Edgewood (87015)

Edgewood sits on a plateau between the Sandias and the Manzanos, and the conditions here are different from the city. UV is intense year-round, daily temperature swings of 30 degrees or more work sealants and fasteners loose, and spring winds gust hard enough to lift ridge caps and peel panel edges. Winter snow sticks longer up here than in Albuquerque, and ice damming at the eaves is a real problem on shops and barns with low slopes. Then monsoon season brings hail that pits and dents thinner panels. We see a lot of older R-panel and corrugated roofs on outbuildings along Frost Road and Barton Road where the screws have wallowed out, and standing seam on newer homes that needs seam and flashing checks after a wind event.

Our team handles everything from a leak repair on a horse barn off Sedillo Hill to a full standing seam install on a new build near Edgewood Elementary. We work with the specific ground here: caliche and gravel that makes anchoring staging tricky, long gravel driveways that need careful equipment access, and lots where the shop is 200 feet from the house. We also know the local permitting flow through the Town of Edgewood and Santa Fe County, and we can help with insurance documentation after a storm without ever promising coverage.

Our services in Edgewood

How a Job Works in Edgewood

Step 1: You call (505) 420-5488 or request a free estimate. We schedule an on-site assessment, walk the roof and the property, and look at the specific issues: fastener condition, seam tightness, flashing at chimneys and skylights, and how the roof drains. We give you a written scope and a clear price before any work starts.

Step 2: We schedule the work and pull the required permits through the Town of Edgewood or Santa Fe County, depending on your address. On rural lots we plan for equipment access and material staging, and we protect landscaping and gravel drives. If your home is in an HOA or a historic overlay, we help coordinate color and profile approval before ordering panels.

Step 3: We clean up daily, magnet-sweep for screws and metal shavings, and do a final walkthrough with you. We don't leave until you've seen the finished roof and know what to watch for.

Pricing in Edgewood depends on the roof, access, and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, which is common for shops and barns. Repairs start at $450 for leaks or flashing, screw replacement and re-fastening starts at $750, and roof coating starts at $2.50 per square foot. Gutters run about $9 per linear foot. Factors that move the number: roof size and pitch, how many layers are already there, how far the shop sits from the driveway, and whether it's an emergency. Call (505) 420-5488 for a free, no-pressure estimate.

My shop off Frost Road has R-panel with screws backing out. Can you fix that without replacing the whole roof?
Yes. That's one of the most common calls we get in Edgewood. We replace the failed fasteners with larger, neoprene-washered screws, check the panel laps and ridge, and reseal as needed. If the panels are still sound, re-fastening starts at $750 and buys you years.
A spring windstorm peeled back panels on my barn near Sedillo Hill. How fast can you get out?
We prioritize storm and wind damage calls in the Edgewood area. Call (505) 420-5488 and we'll schedule a free inspection, usually within a day or two, and can often tarp or secure the roof the same visit if it's actively leaking.
What does a typical metal roof replacement cost for a 2,000 square foot ranch house in 87015?
For a straightforward replacement, most homeowners are looking at roughly $9 per square foot for the roofing, so a 2,000 square foot roof area runs in the neighborhood of $18,000, plus any decking repair, flashing, or gutter work. Access and pitch can move that. We give a firm written price after seeing the roof.
Do I need a permit to re-roof my house in Edgewood?
Most full replacements and re-roofs require a permit, and the requirements vary depending on whether you're in the Town of Edgewood or unincorporated Santa Fe County. We verify with the local building department before we start and handle the paperwork as part of the job.
My neighbor says my new metal roof panels overhang the property line. What do I do?
Property line issues are best resolved before installation. We set the roof layout to stay within your setbacks, and if there's any question we recommend a survey. For HOA communities, we also help you get color and profile approval before we order materials.
Are you fully insured for work on my Edgewood property?
Yes. That protects you if anyone is injured or something is damaged on your property.
What maintenance does a metal roof need in Edgewood's climate?
Check fasteners and sealant every couple of years, especially on west-facing roofs and outbuildings. Clear debris from valleys and gutters before monsoon season, and after a hail or wind event, have us inspect seams and ridge caps. A coating every 10 to 15 years can extend the life of older panels.

Nearby service areas

📍 Albuquerque 87102📍 Rio Rancho 87144📍 Bernalillo 87004📍 Corrales 87048
Why choose us?

Trusted professionals in Albuquerque

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Albuquerque

All your work handled by qualified professionals in Albuquerque

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Albuquerque

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Mike J.
⭐⭐⭐⭐⭐
MJ
Mike J.
Albuquerque

“Had these guys put a metal roof on our hangar out by the airpark and they knocked it out in three days. The crew of four was on time every morning and swept the whole slab clean before they left. Way sturdier than the old panels that were flapping in the wind.”

Commercial Metal Roofing
Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Corrales

“We wanted to cover the old patio entry roof without tearing everything off, and the retrofit over the existing shingles worked out great. They matched the flashing around the adobe walls really carefully so nothing looks patched together. Took about a week and a half from start to finish.”

Metal Roof Over Shingles (Retrofit)
Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Edgewood

“Our barn out in the rural part of the county had rusted-through panels and we needed it done before monsoon season. They installed new corrugated panels across the whole span and re-fastened everything with fresh screws. Honest pricing and they didn't try to upsell us on stuff we didn't need.”

Agricultural Metal Roofing
Michelle B.
⭐⭐⭐⭐
MB
Michelle B.
Rio Rancho

“I originally called about some yard drainage stuff but what I actually needed was gutters that could handle the runoff from our new metal roof, and they set me straight on that. They ran seamless gutters along the back of the house and tied them into the downspouts properly. Small gripe is they had to reschedule once, but the work itself is solid.”

Gutters for Metal Roofs
James P.
⭐⭐⭐⭐⭐
JP
James P.
Los Lunas

“A section of our corrugated roof was leaking right over the kitchen and I was dreading a huge bill. They found the problem was a handful of backed-out screws and worn washers, replaced them and sealed it up in one afternoon. No leak since, even after that big storm last month.”

Metal Roof Repair
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Bernalillo

“We went with standing seam for our southwest-style home and it looks incredible against the stucco. The crew of five finished the whole roof in under a week and the cleanup was honestly better than before they started. Neighbors have already asked me who did it.”

Standing Seam Metal Roofing
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Tijeras

“Full tear-off and replacement on our house, and they walked me through every step including the flashing around the chimney. It rained the day after they finished and not a single drip. Really relieved we went with a company that actually knows metal.”

Metal Roof Replacement
Karen T.
⭐⭐⭐⭐
KT
Karen T.
Belen

“Called them out for an inspection before we listed the house and they gave me a thorough report with photos of every seam and fastener. They did flag a few screws that needed re-fastening near the basketball hoop side of the roof, which they handled on the spot. Fair price and no pressure to buy anything extra.”

Metal Roof Inspection
Free Quote

Get Your Free Quote

Metal Roofing in Albuquerque · Response within 24h · No commitment · ☎ (505) 420-5488

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Albuquerque ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm