Serving the Albuquerque area  ·  (505) 420-5488  ·  Open Mon-Sun 7am-7pm
📞 (505) 420-5488 Free Quote

Metal Roofing in Rio Rancho, NM (87144) · Local Professionals

Albuquerque Metal Roofing · Fast response in Rio Rancho and the Albuquerque area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rio Rancho is stucco country on the West Mesa, and roofs here take a beating from day one. The fast-growing subdivisions off Unser and Northern, plus the older blocks near Rio Rancho High School, all sit on open ground where the sun hits hard and spring gusts come across the mesa with nothing to stop them.

We are Albuquerque Metal Roofing, and we have been installing, repairing, and replacing metal roofs across Rio Rancho and the surrounding Albuquerque area for years. Homeowners in 87144 call us because we know how this high-desert climate works on fasteners, sealants, and panels, and we show up ready to fix the problem, not just talk about it.

Metal Roofing in Rio Rancho (87144)

Most Rio Rancho homes are stucco with concrete tile or asphalt shingles, and the lots are tight in the newer subdivisions. That means we are often working close to property lines, with limited room for staging materials or swinging a ladder. The ground here is caliche and gravel in many spots, so anchoring and cleanup take a little more care than on softer soil. And because the mesa sits at about 5,300 feet, the UV is intense year round, and the daily temperature swings from sunup to sundown work on sealants and fasteners until they let go. We see wind-lifted ridge caps after spring storms and active leaks at flashing points where the original install did not account for how much movement this climate creates.

Our team has worked on everything from standing seam in charcoal and bronze to exposed-fastener R-panel on workshops and carports out toward the mesa edge. We know the difference between a roof that will hold up here and one that will be back to leaking in a few seasons.

Our services in Rio Rancho

How a Job Works in Rio Rancho

Step 1: You call us at (505) 420-5488 or request a free estimate online. We schedule an on-site assessment, walk the roof with you if you are available, and document what we find, including photos of any problem areas. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required permits through the City of Rio Rancho and coordinate with your HOA if your subdivision has design review. We protect landscaping and stucco, stage materials where they will not block neighbors, and keep the work area organized. If we find rot or failed flashing under the old roof, we show you before we fix it.

Step 3: When the job is done, we clean the site, run a magnet over the yard and driveway for stray fasteners, and walk the finished roof with you. We do not leave until you have seen the work and understand what was done.

Pricing in Rio Rancho depends on the size and pitch of your roof, how many layers are already there, access around the house, and whether we are repairing or replacing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10, metal roof replacement starts at $9, and a retrofit over existing shingles starts at $7. Smaller jobs like leak repair start at $450, screw replacement and re-fastening start at $750, and flashing or skylight repair starts at $600. We give free estimates, so call (505) 420-5488 and we will give you a real number for your roof, not a phone guess.

My Rio Rancho house has concrete tile and the underlayment is failing. Can you switch me to metal without tearing everything off?
In many cases, yes. We can sometimes install a metal roof over the existing deck after removing the tile and inspecting the underlayment, but the structure has to handle the weight and the deck has to be sound. We check that during the free estimate and tell you honestly whether a full tear-off or a retrofit makes more sense for your home.
A spring windstorm peeled back some panels on my roof near Northern and Unser. How fast can you get out?
We prioritize active leaks and storm damage. Call (505) 420-5488, describe what you are seeing, and we will schedule the soonest available inspection. If the roof is open to the weather, we can often tarp it temporarily while we order materials and schedule the permanent repair.
What does a typical metal roof replacement cost for a 2,000 square foot house in 87144?
For a house that size, most replacements fall in the range of $9 to $14 per square foot installed, depending on the panel profile, pitch, number of penetrations, and whether we are tearing off the old roof or going over it. Standing seam runs higher than corrugated or R-panel. We give you a written estimate after we see the roof, so there are no surprises.
Do I need a permit from the city for a metal roof in Rio Rancho?
Yes, a roofing permit is commonly required for a full replacement or re-roof, and the requirements can vary depending on the scope of work. We handle the permit application and inspections as part of the job. For specifics on your property, check the City of Rio Rancho website or call the building department directly, and we can walk you through what we will submit.
My HOA requires a certain roof color. Can you help with approval before we order materials?
Yes. Many Rio Rancho subdivisions have design review, and we are used to submitting panel profiles and color samples for approval. We can provide the documentation your HOA needs and wait for the green light before ordering, so you are not stuck with a roof that violates the rules. We also respect property line setbacks and keep staging on your side of the line.
Are you insured for roofing work on my Rio Rancho property?
We are fully insured, with general liability coverage and workers' compensation for our crew. That protects you if anything goes wrong on the job and means our crew is covered while they are on your roof.
What maintenance does a metal roof need in this climate, and when should I schedule it?
In Rio Rancho, the big things are fasteners and sealant. The UV and temperature swings loosen screws and dry out sealant over time, so we recommend an inspection every couple of years and after any major hail or wind event. Spring is a good time to check for wind damage before monsoon season, and fall is a good time to check flashing before winter freeze-thaw. A quick tune-up now can prevent a leak later.
Why choose us?

Trusted professionals in Albuquerque

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Albuquerque

All your work handled by qualified professionals in Albuquerque

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Albuquerque

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Albuquerque · Response within 24h · No commitment · ☎ (505) 420-5488

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Albuquerque ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm