Serving the Albuquerque area  ·  (505) 420-5488  ·  Open Mon-Sun 7am-7pm
📞 (505) 420-5488 Free Quote

Metal Roofing in Los Ranchos de Albuquerque, NM (87107) · Local Professionals

Albuquerque Metal Roofing · Fast response in Los Ranchos de Albuquerque and the Albuquerque area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+196Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Los Ranchos de Albuquerque is the kind of place where a 1940s adobe with a flat parapet roof sits on a half-acre lot under cottonwoods, and the next property over has a horse pasture and a metal workshop. We know these lots well, from the North Valley's acequias and dirt lanes to the busy corners near Rio Grande Boulevard and Chavez Road.

Homeowners in Los Ranchos de Albuquerque (87107) call Albuquerque Metal Roofing because we understand the mix here: historic adobe and stucco homes with canales and viga ends, mid-century ranches with low-slope roofs, and newer builds that need a roof to match the Southwest look. We handle everything from leak repair on a 90-year-old adobe to standing seam installation on a new custom home, and we do it with fully insured crews who know the local building department and the realities of North Valley properties.

Metal Roofing in Los Ranchos de Albuquerque (87107)

Los Ranchos is not a typical subdivision. Lots are often large, with a main adobe or stucco house, detached casitas, portals, and old outbuildings that have been added onto over decades. The ground is a mix of river silt and sand near the bosque, which can settle unevenly and affect roof drainage and flashing details. Many homes have flat or low-slope roofs with parapets, and metal roofing here often means standing seam with a clean, low profile that respects the historic look. We also see exposed-fastener R-panel and corrugated metal on barns, workshops, and carports, and stone-coated steel in a Spanish tile profile on newer homes that want the look of tile without the weight.

The climate is high-desert: intense UV year-round, wide temperature swings, spring winds that can lift panel edges, and summer monsoon storms that bring hail and sudden downpours. On older adobe homes, we pay close attention to flashing around chimneys, skylights, and canales, because a small gap can let water into the thick walls and cause serious damage. Our team has worked on many properties in Los Ranchos and the surrounding North Valley, from the historic core near the Rio Grande Nature Center to the larger lots off Fourth Street. We know the local inspectors and the quirks of the building stock.

Our services in Los Ranchos de Albuquerque

How a Job Works in Los Ranchos de Albuquerque

Step 1: Call us at (505) 420-5488 or request a free estimate online. We schedule an on-site assessment at your Los Ranchos property, usually within a few days. We inspect the roof, flashing, and drainage, and talk with you about what you need, whether it is a repair, a replacement, or a new installation. We provide a written estimate with clear pricing.

Step 2: Once you approve, we pull the required permits from the local building department (we verify the rules for your specific property) and schedule the work. On tight North Valley lots with narrow driveways or mature trees, we plan material delivery and staging carefully to avoid damaging landscaping or blocking access. For historic or HOA properties, we can coordinate color and profile approvals before ordering materials.

Step 3: After the work is done, we clean the site thoroughly, including sweeping for nails and debris, and walk the roof with you to make sure you are satisfied. We do not leave until you have a clear understanding of the finished job and any maintenance recommendations.

Pricing for metal roofing in Los Ranchos de Albuquerque depends on the size and complexity of your roof, access, the condition of the existing structure, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot, but keep in mind local code limits the number of layers. Repairs start at $450, and leak repair also starts at $450. Screw replacement and re-fastening starts at $750, which is common on older exposed-fastener roofs. For a free estimate tailored to your property, call us at (505) 420-5488.

My adobe house in Los Ranchos has a flat parapet roof and canales. Can you install metal roofing without ruining the historic look?
Yes. We often recommend standing seam in a low profile and a color that blends with the adobe, such as charcoal, bronze, or a custom match. We pay special attention to flashing around canales and parapets to keep water from getting behind the walls. We can also replicate the look of traditional canales with metal scuppers if needed.
A spring windstorm just peeled back some panels on my barn off Rio Grande Boulevard. How fast can you get out to repair it?
We prioritize storm damage calls. Call us at (505) 420-5488 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can secure the roof temporarily if needed and provide a written repair estimate.
What does a typical metal roof replacement cost for a 2,000 square foot ranch house in Los Ranchos?
For a 2,000 square foot ranch with a low-slope roof, a metal roof replacement might range from $18,000 to $25,000, depending on material and access. Standing seam would be at the higher end. We provide a free estimate with exact pricing after inspecting your roof.
Do I need a permit from the Village of Los Ranchos for a metal roof installation?
Yes, roofing permits are typically required for a full replacement. The Village of Los Ranchos has its own building department, and rules vary. We handle the permit application and inspections for you, and we always verify current requirements with the local building department before starting work.
My neighbor and I share a property line, and I want to make sure the new roof does not encroach. What should I do?
We recommend having a survey done if the property line is unclear. We can work with you and your neighbor to ensure the roof and flashing stay within your property. If there is an HOA, we can also coordinate design approval.
Are you fully insured for roofing work in Los Ranchos de Albuquerque?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews.
What maintenance does a metal roof need in Los Ranchos given the dust, UV, and monsoon season?
We recommend an annual inspection, especially after spring winds and before monsoon season. Check for loose fasteners, debris in valleys and gutters, and any sealant wear. A coat of metal roof coating every 10 to 15 years can extend the life of exposed-fastener roofs.
Why choose us?

Trusted professionals in Albuquerque

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Albuquerque

All your work handled by qualified professionals in Albuquerque

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

196+ Verified Client Reviews in Albuquerque

⭐⭐⭐⭐⭐ 4.9/5 · 196 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Albuquerque · Response within 24h · No commitment · ☎ (505) 420-5488

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Albuquerque ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm